 |  | The Stuff Page: Things that ended up tossed but that seem like they have another life ahead of them.
Click here to find out what this "Stuff Page" thing is all about
|
| | The Stuff Page: Things that ended up tossed but that seem like they have another life ahead of them.
Click here to find out what this "Stuff Page" thing is all about
|
Currently viewing older stuff, starting from entry number 1872....
| Newer stuff | Stuff Home All stuff | Older stuff |
There appeared in the air a flying object, saucer-like but with a handle! The elite UFO investigation team that reached the point of impact were pleased to identify it as a Calphalon 10inch non-stick omelet skillet. The point of impact was of course a scrap metal dumpster and the person who launched it through the air had apparently no further use for it. Reason for discard, bowed bottom, which is conveniently also a fine reason for warranty return......
A really nice panasonic steel frame in excellent shape, completely stripped. Also an old and rather classical and stylish Hunter 3-speed with Brooks leather saddle.
We have been looking for a good one of these for a while. This one has a nice handle with heat shielding and a second handle to assist in the final pouring of the coals. It has some rust on it and other siugns of use but is in pretty good shape for something that has endured that sort of heat cycling. It has a nice size also. Tested it the same night cooking dinner on the BBQ, hangar steak, sausages, smoked pork chops, corn, brocolli rabe and potatos all cooked over that fire. We added no further coals after initial starting in the chimney.
Random jogging stroller as shown in the pic. Seems to work fine. Also, another one not shown. It had folding issues but now I oiled it it has different folding issues. We will see about that one.
A Wood Classics teak table, with four matching chairs and a matching bench. They are all in OK shape and will be cleaned and oiled for our use. Fortuitous really, we have been discussing redoing the patio and getting a better table for it as the current one is starting to rust. Curbside bulk garbage day offers a great in-car shopping experience. Here is a pic showing the table and bench after some cleaning and some teak oil, chairs yet to be prettyfied. Note patio underneath that really needs doing, where am I going to find free discarded patio materials we all wonder?
I got this for the custodian of the pool table we found. Not that he is an idiots or needs to learn more about pool but it can sit next to the table in case an idiot does show up.
Probably useless but somebody might want it. No power supply unfortunately.
Two large oxygen tanks. They look to be in good shape, latest test dates 2000 and 1994. They are available for anyone who wants them, failing that I may try to see if there is a deposit on them I can get. Crappy pic taken in dark garage in the middle of the night, sorry about that.
The last one of these Maclaren Double pushchairs went for a pile of cash on ebay so we will try the same with this I think. The last one had a small break in the hood but hopefully this one will turn out to be in fine shape upon further investigation.
A nice looking Dualit 3-slice toaster. I initially got it for somebody else but we might keep it for ourselves now. I have never played with one of these before, they seem quite nice and simple. The previous owners had even been so thoughtful as to empty the crumb tray before tossing it out. How nice.
Eight quart stock pot, regular aluminium with the hard anodised finish worn off somehow on the inside, see pic. It is actually in much better shape than the picture makes out, almost new in fact. It is as if the former owners cooked up a pot of acid in the first week they owned it and that scoured the inside but left the rest relatively pristine. This is going for a nice warranty return and will come back all super spiffy and shiny.
This is a request item for a friend who needs it to move a bunch of bikes he is acquiring from us, they of course appeared on this page at some point. The photo makes it look like there was a brutal mnurder or some such involved in acquiring it but that is just water etc that seems to look sinister in the depths of the night. Honest.
iMac 400. These things are getting pretty dated now but they will still run OS 10.4 with enough memory chucked in. This one boots OS 9 and has some video issues but maybe they are the special firmware thingy. Will find a home somewhere if we can make it work, and maybe if we cannot. We have one or two iMacs in stock in case anybody wants one to tinker with, they run Ubuntu nicely.
Two slightly dated racing style bikes, a Schwinn and a Univega. Both are slightly heavy compared to their really modern counterparts etc but are in nice shape. Both are already in new home with happy users, sketchy pic of this one with tyres pumped up and rideable.
1GHz Dell Pentium 3 PC with a nice 256M RAM chip and 10G HD plus DVD rom. We got this mainly for sending to certain avid teenaged tinkerers (you know who you are!). It does not seem to boot (hardware/power supply issue) and has linux installed on it. Whole or in parts it will still be sent off. Pic shows it pulled apart so that I could inspect the HD on another machine (yours Charlie) using knoppix.
Update: After reseating memory, CPU, HD and all motherboard connectors this PC now works fine. Canadian rebuild strikes again! Currently running knoppix on it watching Ultraviolet with xine as a test of the machine. Check out the screenshot of this here, Dr March is just cleaning up Mike's leech bite. Machine will now be sent complete with extra parts added in rather than as extra parts itself.
Somebody had zip tied 3 bosch oil pumps together and plumbed their inputs and outputs together with very fancy stainless tube fittings such as those sold on this page . As we often purchase and use fittings just such as these we dismantled the assembly, tossed all the junk and the pumps and kept the fittings. Spiffy, the collection included stuff such as these in sizes such as 1/2 inch tube and 5/16 inch tube resp.:
The whole arrangement looked pretty new so I suspect the construction was rather speculative and did not work. And no Rob, these pumps would be no use for your your reclamation setup. For other things maybe some use. Pic of them hangining out between on a shelf
A newish stainless steel 55 gallon drum dolly. These are not cheap, check out McMaster again here ,l item number 2608T14 near the bottom. I have no real use for it so it is up for grabs (Christine??) before I try and find somebody to pay for it. Or maybe I should expand my own oil reclamation activities?
The brass we found was 135 lbs and scrap brass is now USD 1.70 per pound. Woohoo!
No, not the long lost imitator of Weird Al . Al as in the element, or alloys thereof. We finally caved in and picked up some scrap aluminium, mostly because we found a whole pile of good solid chunks of it. It is not as valuable as copper/brass etc but when you find chunks weighing 20 lbs it becomes worthwhile to collect
Some memory and a 30G HD, blah blah. Memory will go to ebay as part of a job lot. The HD had the following salient points:
21 tom petty
10 red hot chili peppers
9 bruce springsteen
8 led zepplin
8 eagles
8 dispatch
6 tupac
6 led zeppelin
6 kc
6 frank sinatra
6 bob marley
6 50 cent
5 will smith
All in all a nice view into the life of a "normal" internet user. Very satisfying to see some nice cliches fulfilled. Here is a pic from the family Christmas Trip to Radio City Music Hall, at least from what I can gather. Do they let you take pics in there, maybe this pic is illegal also?
We found a fancy rucksack/carryon converter bag with lots of fittings on it. Bag was a little decrepit but the snap fittings etc were good so we cut them off. These will possibly be used in some form of custom offspring retention device, maybe as part of aforementioned homemade baby-bjorn project.
The most recent 12inch calphalon frying pan we found has duly made its way back to us after having every part of itself simultneously replaced by the manufacturers under warranty. Nice.
An Epson c84 printer, see here for example. Needed cleaning but seemingly works. Spiffy.
Two 500Mhz Pentium 3 laptops good for not much at all, ITC brand (who are they we ask, without caring to hear the answer). Donated to somebody who seems to value such things so fast that there is no pic, good turnaround.
The existing tricycle that was deployed to amuse the offspring of guests was getting rusty, a testament to its permenant outdoor home. We found an new and inferior version today, inferior because it is plastic, but it will not rust I guess. It will just embrittle and fade. Either way it is on much better shape than the last one, o9ut with the old and in with the "new"
An iMac x86 shipping box. This will be sold to some mac user at some point. Bonus inclusion was all the docs and the OS 10.4.4 install/restore CD. Woohoo!
We found a sufficient quantity of brass sitting on one place to incent us to pick it up. Probably a 100 or so pounds of it. This will all duly be converted into meat and wine via the arcane alchemical process of driving it to a non-ferrous metal scrap dealer and taking the money they hand over to the meat and wine repositories. I am not sure what the exact scrap price of brass is but I know it is unseasonably high. No pic for now, you know what brass looks like.
A local dive bar has been purchased for its booze license and the new owners have decided to toss the pool table. We happened by at the right time and found a home for it. It is real slate and pretty heavy though the furniture elements are somewhat beat up from being in a dive bar the last 20 years or so. Pic shows it loaded into the trailor for transport to its new home. Those of you sneering at my prior perceived trailor snobbery should shut up now.
A late model toilet seat is seemingly pretty good condition. It chimes when the power button is pushed but does not get any further that we can see. Various pieces will be sold to Mac dudes anxious for spare parts.
Either a WWI/II British helmet or a WWI US helmet. Pretty ratty but cool. I think it has only a small value on ebay but a friend of mine likes such things so we will show it to him. Any ideas what that insignia means?
An oldish drill that still seems to function but is way too crappy for our usage. Not that we are drill snobs you understand, but we have several far superior models already. A friend wishes to have it so that is all well and good. I just wish he would have told me last week when I had to the chance to pick up a basic milwaukee drill for 10 USD almost new.
Yet another juicy Calphalon 12inch omelet non-stick with the teflon worn off. We all know where this is going, it even looks almost exactly the same as the last one of this size.
At an estate sale, having selected lots of juicy items, I found some bottles of fizzy hidden in the tool cupboard in the basement. I brought them up from the basement for the attention of the bereaved daughter. The juicy items I of course paid for and hence they do not appear here except in passing. After I pointed out the value of some items I did not want however, I was given a bottle of the fizzy plonk, free stuff. We shall sample it at an approriate time. Pic shows the plonk in front of two of the super bargains I got.
Two threading taps (1/2 course and 12mm 1.5) and large stud extractor. Quite possibly handy things to have so they go into the machine tools chest for future use.
A swirler thingy for mixing or agitating things. It looks absolutely brand new and in fact the power cord that was right next to it was still sealed in its plastic bag. Upon first test it did not work but when I opened it up and gave it a hand assist start it ran fine. After that it started fine on its own. Special. It is an MS 450 Swirler by IKA, I guess.
Aforementioned hard drive was found to have the following data:
| Newer stuff | Stuff Home All stuff | Older stuff |