 |  | The Stuff Page: Things that ended up tossed but that seem like they have another life ahead of them.
Click here to find out what this "Stuff Page" thing is all about
|
| | The Stuff Page: Things that ended up tossed but that seem like they have another life ahead of them.
Click here to find out what this "Stuff Page" thing is all about
|
Currently viewing older stuff, starting from entry number 1836....
| Newer stuff | Stuff Home All stuff | Older stuff |
A pretty fine pile of books. Assorted novels and literature etc, all very interesting. An interesting combination of cookbooks and weight-loss books, mostly we do not pick these up. Also some really nice art books etc. The Sotheby's wine enclyclopedia we already found a home for. Some pics below:
Two worklights, as idly requested the other day while working on the house.
HP Pentium 3 800MHz with Windows XP installed and only 32M of ram. Astounding. From the pristine undisturbed state of the monster dust bunnies inside I would say that the 32M of ram was all that was in there the whole time and none had been removed before we got to it. The dust bunnies were the worst I have seen in a while. Needless to say, bearing in mind the memory size, the thing took for ever to boot. Lots of family pics and stuff, a few word docs, kids' homework etc etc etc. iTunes installed with just a few pieces of media, Limewire likewise. This picture was on the HD and is particularly notable in the self referential sense because it shows the HP machine itself that we found the picture on but also the box from the Sony camera that took the picture (as confirmed in the exif headers).
This machine has a new home with a friend of a friend already. We tossed in a 256M ram chip we found seperately. So now the machine is not so very bad and might have another life ahead of it.
Stainless steel kitchen sink complete with Moen single lever mixer faucet and snake squirter. It looks to be in near perfect condition and came up super shiny after a quick clean. We are looking into a new kitchen sink for ourslves but we want an under-counter mount. Hence this one is straight off to craigslist as the last one was a roaring success there.
Update: Sold after a few hours on craigslist. Fine.
A fire extinguisher, of distinctly vintage type. The primary reason this was picked up of course was for scrap brass but it seems pretty special and "period" so we may try to find a rabid fire extinguisher collecter to give us money for it. Ebay or craigslist might assist in this endeavour.
Some art, details as yet unknown but investigations are is progress by those in a position to know. But is it art? We will see.
Well, as I was mining a rich seam of discarded brass plumbing fittings ($1:50 a pound scrap value) a woman asked me if there were any wrought iron railings in the pile I was looking through. I replied that no, there were not, but the guy over there with the Ford Exploder and homemade plywood trailor had a whole load. After overcoming her various stages of incredulity at my apparent omniscience she arranged to offload the railings directly from truck to truck. In return for my handy indexing functionality (something I am known for in other areas) she gave me a starbucks gift card for 5 USD. That counts for this page because I found some free discarded stuff and traded knowledge of it's whereabouts for the card. But, can you still get a drink at starbucks for a paltry 5 USD? I guess I will see.......
Linksys NAT box. Looks to be in good shape, untested as yet. This is pretty surplus so if you need one of these it is yours to play with I would think.
A nice little bar sink, stainless steel complete with water pipe, taps and feeder tubes etc. Missing the snake or soap, though it looks like there was never a snake installed. The sink and taps are in good condition. We are currently looking for a sink but not this type, so this is available in a craigslisty type way.
Update: Sold in a very craigslisty way so no longer available.
Attached to the copper tubing from yesterday we dicovered a water feeder. As luck would have it this is the same model that we have. Ours has had a leaking problem for a long time and even though this one is pretty beat up we may be able to make one good one out of the two. Mmmmm, hybrid devices.
A nice selection of books with enough variety to please everybody. Pic soon.
A Homelite Echo weed whacker. It looked so complete and spiffy that we took it home. After adding fuel and giving it a few cranks it started and ran and whacked weeds. Reason for discard seems to have been that it ran out of fuel. Cool. Pic shows it posed in the neighbour's driveway....
Random Gateway Pentium 3. Again not worth our time to fix up but worth a quick look at the bits. Boring, but here is the summary:
A run of the mill Dell Pentium 3 PC which did not seem to want to boot. Seems in OK shape though, it will be passed on to somebody who has more time for machines this old. First though, a quick look at the HD reveals a happy family lifestyle. Some salient points:
A nice galvanized storage bin which we will use to store our accumulating pile of scrap copper, of which today there was a fair haul. Somebody tossed their entire furnace plus lots of pipes and peripherals.
Two 100baseT switches, mildly antiquated by the standards of their industry, but seemingly OK, one 8 port and one 5 port. Thes will be tested and made available for anybody who wants them. Rob? Charlie? Also present were some junky hubs and a very old laptop, left that other stuff.
Update: both tested out OK, each has power supply etc. Get them while they are hot.
One Calphalon Contemporary omlete pan like this. These are the middle of the range versions and not nearly as nice as the "commercial" or "one" range. This one has a loose handle and a lifetime warrantly so we will find something to do with it.....
A nice selection of computing hardware. First an e-machine Celeron 2.0Ghz PC, 256M ram but no HD. Also an e-machines Athlon 2400, same source as previous, again no HD but has memory etc. Pic shows the Athlon but the Celeron looks almost exactly the same:
Next a Dell Pentium 4, complete with everything. Watch this space to see how much completness there is in the data on the 40G HD. I think this is identical to a prior Dell Pentium 4 we had.
A fancy netgear NAT box and vpn thingy, plus a netgear 802.11g access point and NAT box. Both untested but so far they look in fine shape. One or both may get deployed as they both have advantages over their equivalents that we are currently using.
Another happy little push lawn mower, same brand as our previous ones. This one is in very good shape in the blade department, having been sharpened and set recently, but the handle is a little beat up. No problem, it will get the handle off another one that has a cracked cast iron side casing and all will be well. Shown here before its rennnovations.
Atari 5200 supersystem plus a whole bunch of extras. It mostly looks like it has not been used, all very special. This will be tested and maybe some action stills posted later but for now just a boring ebay style showcase pic.
The 3 foot pipe wrench was required to remove a radiator. Tried the 18inch model and did not work but the 3 footer cranked it right off. How fortuitious that it turned up a week or so in advance of when it was really needed.
The pipe wrench got further cleaning and restoration to original manufacturer colours. Pretty much anyway. It is now in fine shape, as evidenced by this pic. It is pretty old but seems in good shape modulo the surface rust it had on it when it was found. I am sure we will have a use for a 3 foot pipe wrench at some stage.
Also the calphalon 8qt stock pot came back from its excursion to warranty-return-land and went, via ebay, on a journey to the house of a complete stranger. The 10inch omelet skillet went straight from warranty-return-land to a friend of a friend as a gift.
Upon detailed investigation, the dualit 3-slice toaster had one element dead inside. The thing has quite a history already as an acquaintance had asked me that day, "hey, could you find me a toaster?". I thusly found that toaster but he declined to take it as he was pushed for baggage space etc on his plane trip home. After we played with it and grokked the mechanism we liked it, hence our discovery of the bad element (reason for discard?). Another aspect of this toaster we like very much is that you can get replacement parts for it, hence we did so and voila, we have a "new" toaster. Sure beats buying one.
One set of underwater technical lego, complete enough to be convincing. Seems fine. This was donated to some form of remote cousin, hopefully providing some small moment of childhood happiness.
Also a couple of sets of K'nex, well populated though obviously we have no idea of their completeness, should that even mean something with this product. Donated to yet another remote cousin, in fact a 1st cousin of the aforementioned remote cousin. Again, seemingly happiness ensued.
Lots of this is catching up with stuff we found a while ago, but certain readers have been nagging us to update here so off we go. Lots of baby seat stuff. For example here we see a brand new never been used Eddie Bauer infant seat. We offered this to a friend who has impending offspring and he informed us that his wife wishes to buy everything new. Well, this is new, just not bought by you? Whatever.
Further a couple of Evenflo seat bases, these are usually good for craigslist or some such.
Also an Evenflow complete baby seat, ready for use etc etc. Not seen much use hence it will be good for somebody at some stage.
We finally amassed enough non-ferrous scrap to fill a military surplus missile resupply trailor and wandered down to trade it in for cash. A few hundred pounds of alu at 61c/lb, a hundred plus of brass at $1.30, a hundred plus of lead at 16c and a load of copper at $2.50. They issued us a handy little receipt to take to the front desk and they dished out several hundreds of dollars for us. Cool. They even unloaded the trailer for us with great dispatch, better service than one gets at many restaurants.
A painting platform type thing, used for painting the ceiling or reaching into high places with better freedom of movement than on a ladder or chair. This was almost destined for scrap Al but we thought it would prove useful at some stage so gave it to a friend on condition we might borrow it at undertermined times in the future. Oh, and yes it is in fact new in the wrapping?!?
Visiting friends appear with their two genetically programmed terrorist offspring, what should one do to amuse them, we all say? Well it so happens that we found two nice alu scooters that were adjustable in such a way as to provide amusement devices for their age groups. "Engage!", we all cry and deploy the scooters in a frantic ploy to distract the monsters from tall buildings etc. Success........
Not especially special but there it was, all discarded and lonely. A silver hookah. It was promptly donated to one that might appreciate its charms.
6 sticks of PC100/133 memory and a HD. Pretty junky stuff but the memory sells well on ebay in nice assortment style lots and the HD is handy for fixing crappo machine for people. No pic for now, you know what this junk looks like.
Life vest, US Coastguard Approved, to suit some particular mass range of human offspring. This mass range is destined to be attained by our particular offspring at some stage and hence this item will put this aside for that day. Pity about the nasty imagery on it.
36 inch Ridgid pipe wrench, after a cleanup it looks a lot better and may be kept lying around for future usage. Maybe a little refurb first though, it deserves some paint I think and a cleanup.
Double Maclaren stroller, all seems in good shape, just a little dusty. CR for this I think, as soon as we get ourselves organised.
Calphalon square griddle pan with corrugated base. It is almost brand new and has probably been used just a few times, but it was dirty and hence got thrown away. It is very like this one but not non-stick. We have cleaned it a bit already but we have no use for it so it is yours for free if you want it and you get to clean it. The dirt comes off with a little persistence.
This is a very similar thing to that skillet above but copper with a brass handle. It has a tin lining that is coming off, hence the thing is no good for cooking as we do not want to ingest lots of copper. Now it could either have some non-food use or contribute to the brass and copper piles for the non-ferrous scrap. Anybody want it? It is quite ornamental. Made in Italy.
Update: It is possible to get these things retinned, or to do it yourself. Nice! I may have to give it a try, although I am still not really interested in this particular skillet and hence it is still available to any who want it.
| Newer stuff | Stuff Home All stuff | Older stuff |
